Shop Lawn Mower Parts
This lawnmower safety control cable replaces MTD part no. 746-0553. It is used on the push lawnmowers with Briggs and Stratton engines which are built since 1991. The conduit is 36-7/8" long and the cable is 43-1/8" long.
This PTO or deck engagement cable is an aftermarket replacement for MTD part no. 946-04173, 946-04173B, 946-04173C, 746-04173C, 746-04173B, and 746-04173A. It is 55" long and is used on 13**7** model riding lawn mowers built after 2004.
This lawnmower safety control cable replaces MTD part no. 746-0552. It is used on the following push lawnmowers: 040, 050, 060, 070, 080 and 090. It is used on these self propelled models: 100, 200, 400, and 700. The cable is 55-1/2" long and the conduit length is 49-7/8".
This lawnmower choke cable replaces MTD part no. 746-1085A. It can be used on many lawnmowers and riding lawnmower models. It is 39" total length and 37" conduit length.
This lawnmower throttle control head replaces MTD part no. 811-0185. It is used on walk behind lawnmowers and does not include the throttle wire. It uses throttle wire, no. ROT60-012, ROT60-013, ROT60-014, ROT46-323, or ROT46-324.
This lawnmower throttle control cable is a true OEM MTD No. 746-1086. It is used on lawn tractors with the Briggs & Stratton intek engines which were built from 1999 through 2002. It has a Z bend on end. Conduit 42" and Inner Wire 45".
This lawnmower safety control cable replaces MTD No. 746-0550. It has a Z bend on each end, conduit cable length of 40", inner wire length of 46-3/8", and inner wire diameter of .060. It is used on the following push mower models: 040, 050, 060, 070, 080, and 090, and the self-propelled models: 100, 200, 400, and 700, years 1985 to the present.
This lawnmower safety control cable replaces MTD part no. 746-0554. It is die cast and has a Z-bend on each end, has a braided inner wire and a plastic conduit. The conduit is 41-1/4" long and the inner wire is 47-3/4" long. It is used on walk behind lawnmowers.
This lawnmower throttle housing replaces MTD no. 746-0875 and is used on ORE60-016 throttle cables.
This lawn mower brake control cable is a true OEM MTD cable no. 946-0551. It is used on models 440, E466, and 469 series.
This lawnmower throttle cable is a true OEM MTD and Cub Cadet throttle cable, no. 746-1100 or 946-1100. The cable is used on the 800 series riding lawnmowers which have the Kohler twin cylinder OHV engines. The dimensions are as follows: conduit length - 38" and overall length - 40-1/2".
This lawnmower clutch cable is a true OEM MTD cable, part no. 746-1083. It also fits some of the Rear Tine Tillers which are built by MTD.